Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: Can you make old wire softer/playable?


2K+ Club

Status: Offline
Posts: 2674
Date:
Can you make old wire softer/playable?
Permalink  
 


I would like to use my old front light and engine harness.  they Are a little stiff from heat and age.  Is there any way to make the insulation more playable? 



__________________

Jim L

Lake City



2K+ Club

Status: Offline
Posts: 2788
Date:
Permalink  
 

I've never heard of a product to re-new old insulation. By the time this would be considered, I'd guess it's cracking and chunking off. As long as you're careful on removal, and don't do any hard bends you shouldn't cause any damage. The copper is still good, but the connectors should get some attention. Take a look here

After 55 years all the "stuff" has off-gassed, baked, whatever out of the plastic. It's pretty much set in the position it's been in for a 1/2 century.



__________________

 

John D. - St. Louis Park, MN.

1965 El Camino - LT-1, 4L60e, 4wh discs, SC&C susp.
2013 F-150 Platinum - Twin Turbo 3.5

2018 Factory Five MkIV Roadster build thread



President

Status: Offline
Posts: 7253
Date:
Permalink  
 

I think Karl said Ron had soaked his harness in WD-40 to re-new it ??
The problem will be, as John said, getting it out without having it break apart.

When I got my '66, the PO had re-wired most everything under the hood.....with the same spool of Red wire...clonk

I immediately bought an American Autowire update kit. They do make a replica, plug and play, IF the car has all original type parts.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS 350 rs



2K+ Club

Status: Offline
Posts: 2674
Date:
Permalink  
 

Lost in the 60s wrote:

I think Karl said Ron had soaked his harness in WD-40 to re-new it ??
The problem will be, as John said, getting it out without having it break apart.

When I got my '66, the PO had re-wired most everything under the hood.....with the same spool of Red wire...clonk

I immediately bought an American Autowire update kit. They do make a replica, plug and play, IF the car has all original type parts.


 Everything is out and free  except I want to remove the brake booster to get at those large plugs at the firewall side of the fuse box. 

do you know if Karl revolved all the old tape?



__________________

Jim L

Lake City



2K+ Club

Status: Offline
Posts: 2674
Date:
Permalink  
 

John D wrote:

I've never heard of a product to re-new old insulation. By the time this would be considered, I'd guess it's cracking and chunking off. As long as you're careful on removal, and don't do any hard bends you shouldn't cause any damage. The copper is still good, but the connectors should get some attention. Take a look here

After 55 years all the "stuff" has off-gassed, baked, whatever out of the plastic. It's pretty much set in the position it's been in for a 1/2 century.


Thanks  for the link John.  Everything worked well last fall.  I don’t see any cracks in the insulation so far, just a lot of black paint.  All connection are separated except those 2 at the firewall.  A lot of good tips in that link.



__________________

Jim L

Lake City



1K+ Club

Status: Offline
Posts: 1166
Date:
Permalink  
 

I will check with Ron on his methods on wiring.
I know he did strip ALL old tape.

Remember, the assembly of white ElCamino has been his project.

I Coach, Cheerlead, help with some of the $$$.
Some consulting on fitting, otherwise he is the Driver and Pit Crew on this project.

In Fact, Title was transferred to Ron last week.

Technically, I only have ONE (1) ElCamino in my name All others are in Scots, Rons' or have open titles.

I will get back to you on his thoughts.

Karl




__________________

More ambition than brains,

If you have more than 5 of anything, best to stop counting!



2K+ Club

Status: Offline
Posts: 2674
Date:
Permalink  
 

Wondering what kind of tape he used to wrap the wires to re place what he removed.  Also wonder if he found those clips that hole the wire to the radiator support, etc.  I think I will have to scrape most of the paint of three wires, then plan to use acetone with a rag to remove the rest of the paint.  Wondering how long he soaked the wire in W-D 40.



__________________

Jim L

Lake City



President

Status: Offline
Posts: 7253
Date:
Permalink  
 

American Autowire has tape like the original stuff. It isn't really "tape" in that it isn't sticky. You wrap the bundles, tie off the ends and after a few heat cycles, it shrinks tight around the wires. It's very much like heat shrink tubing, but, obviously, much thinner.
The glue on black electrical tape will melt with heat and turn into a gooey mess in time.

If the wires with paint will be covered by the tape, I wouldn't worry about them and I don't recommend using acetone to clean anything that can absorb the flammable chemicals. Even after it is dry, the accelerant is still in the fabric and can burn easily.

r0067108.jpg

https://www.americanautowire.com/shop/harness-tape  There's a vid to explain how to terminate it at the end of a run and how to deal with branch offs.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

Some Assembly Required

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS 350 rs



1K+ Club

Status: Offline
Posts: 1166
Date:
Permalink  
 

Ron had the non-sticky OEM style tape.
Chose to use the Regular "sticky" electrical tape.

Back to easiest to put on and have stay on.
No way will our Elcaminos be subjected to the conditions they survived for the first 40 or 50 years of their lives.

Even if the glue "bleeds", not a big deal, maybe that is the time to rewrap on top of sticky stuff.beers

Karl



__________________

More ambition than brains,

If you have more than 5 of anything, best to stop counting!

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Chatbox
Please log in to join the chat!