Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: (2) Natural Gas infrared 75000 BTU tube heaters.


Founding Member

Status: Offline
Posts: 2787
Date:
(2) Natural Gas infrared 75000 BTU tube heaters.
Permalink  
 


I have 2 older "Gordon-Ray" brand 75,000 btu infrared tube heaters for a garage. They are about 20' long.

I got them real cheap, and intended to convert from NG to LP, but the cost for parts to convert is too high to justify putting into heaters this old.

Looking for $100ea. 



__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project



President

Status: Offline
Posts: 7321
Date:
Permalink  
 

Derek69SS wrote:

I have 2 older "Gordon-Ray" brand 75,000 btu infrared tube heaters for a garage. They are about 20' long.

I got them real cheap, and intended to convert from NG to LP, but the cost for parts to convert is too high to justify putting into heaters this old.

Looking for $100ea. 


 Do you have the reflector shield and hangers too ?

If so, I'll take 1. That is what I have in the shop now and they are very efficient.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20



Founding Member

Status: Offline
Posts: 2787
Date:
Permalink  
 

Reflector shields are on them, not sure about hangers...

__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project



President

Status: Offline
Posts: 7321
Date:
Permalink  
 

If the shields are still on the tubes, the hangers should be what is holding them in place. The hangers are stainless rod that wrap around the shield and support the tube underneath. They should have a notch at the top for a chain and S hook to hold them up. Any pics to see what you have ?



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20



President

Status: Offline
Posts: 7321
Date:
Permalink  
 

Here's a pic. There is one type of clamp that holds the reflector to the tube and the stainless hanger that supports both.



__________________

Mitch D.   River Falls, WI

Lifetime member of the "Cars apart Club"

1966 Chevelle SS 396 M20

1970 Chevelle SS 396 M20

1967 Camaro SS/RS 350 M20



Founding Member

Status: Offline
Posts: 2787
Date:
Permalink  
 

Still have these. They're stuffed under the TT, but they're somewhat easy to access right now if anyone's interested.

 

IMG_3333_zps24e88ddf.jpg



__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project



Mega Poster

Status: Offline
Posts: 710
Date:
Permalink  
 

Derek call me on it just a matter of getting down there.

__________________


Founding Member

Status: Offline
Posts: 2787
Date:
Permalink  
 

Dave has 1st choice, but there's still one left.

__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project



Mega Poster

Status: Offline
Posts: 710
Date:
Permalink  
 

Derek I may as well take both when I come down.

__________________
Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Chatbox
Please log in to join the chat!