Discussion Forum - Northstar Chevelle Club

OscarZ · OscarZ

I ran across this car on my way home yesterday afternoon. I thought I would share in case anyone was interested. http://www.hubgarage.com/mygarage/vehicles/64368 Click on the link if you want to see the pictures full size. The owner has had the car since 1981. It was originally an Arizona car and...

John D · John D

Yup, the "Northstar Chevelle Club Support Barge" aka "Buford" is available for parts. Already Sold/Spoken for: LT-1 & 4L60e Engine Computer Engine Wiring Harness Available: Everything else! This car has every power-toy & accessory available.

Jon H · Jon H

Now that I have gone to 15" wheels, I realized I needed a 15" spare. Anyone have an extra 15" wheel and maybe a decent tire for a spare for sale for my Chevelle? Thanks. Jon

67ss · 67ss

Looking for a 8.5 posi unit if anybody has one laying around. We found a rear end to put under the 55 chavy that came apart at the club picnic. Its a 2.73 one wheel wonder but want to make it a 3.42 posi.

bowtie · bowtie

Kid at work did a burnout, lunched his rear end. Needs a 9.5" rear end. His is a 3.73/posi truck too. I referred him to Libson/Twin City Auto and the salvage yards, but who knows if he'll get around to calling anytime soon.

Enganeer · Enganeer

http://minneapolis.craigslist.org/ram/pts/1943792379.html

bowtie · bowtie

A customer told me about a car that he was offered not too long ago. He said it was still there not too long ago still. Hwy 65 and Constance in Ham Lake, go east @ 1/2 mile on LH side. There's a collapsed garage. It's in there. The custoemr told me he was offered it for a couple hundred before the garage went dow...

bowtie · bowtie

It is posted on our member's discount page, but I wanted to make sure everyone had the chance to see it--- Chris Straub at Straub Technologies has offered a discount to our club. His deal is pretty good: Any club member that buys a cam from me gets a $25 off. Any club member that orders a cam and lifter kit ge...

more ambition than brains · more ambition than brains

Have now sold two of my 66 Chevelle Post cars. Still have four (4) 66 Chevelles left. One is a Factory air 2 door Post car with tinted glass and a Title. Rusty frame. Major resto project. Have another 2dr. post parts car. No engine, trans or interior. Also two (2) four door sedan parts cars. One is a com...

Jon H · Jon H

I have a 5 year old Dell dimension 3000 desk top that I am getting rid of. Included is a 17" flat panel monitor, keyboard, mouse and computer minus the hard drive. I have been advised to dispose of the hard drive for security reasons. I believe Best Buy and similar places sell hard drives relativ...

4-door Chevelle · 4-door Chevelle

This is for the rear of my Chevelle for when I am pulling the camper. 29" keeps my speedo correct. Not picky about anything else but it can't be too wide as the tongue weight pulls the rear down a bit so the tire needs to fit in the wheel well. This can be with or without wheels but prefer steel if with. Ma...

bowtie · bowtie

Saw it on the way to work. It's white, body is decent, red interior. Cragar wheels. It runs 'cause I don't see it on the way home, tabs are up to date. 763-670-9074 not mine, but I figured I'd pass it on

bowtie · bowtie

http://cgi.ebay.com/ebaymotors/1971-Chevelle-VINTAGE-race-car-oval-road-course-_W0QQcmdZViewItemQQitemZ150480261292QQptZRaceQ5fCarsQ5fNotQ5fStreetQ5fLegalQ5f

69SSConv · 69SSConv

I am posting this for a potential club member who is trying to locate a 1960 348 v8 and Powerglide transmission for his 1960 El Camino. If anyone knows where to find one, or salvage lots that would be worth calling please let me know so I can pass it on.

bowtie · bowtie

Just wanted to let people know my stuiff is available is someone needs it. One PS brackets is kinda custom to work with my headers. AC comp spins freely, only compressor and brackets-no lines/dryer/condenser/etc

67ss · 67ss

Bought a new washer and dryer. This is the old dryer, it still works great and is set up for propane. Would like $50.00 for it but make me an offer.

Enganeer · Enganeer

Cleaning out the garage today. Windstar electric cooling fan and factory connectors. $25 (2) Taurus fans; One with connector and stock relay box @$20, one with connector end $10 SBC tall valve covers with Chevrolet script, block powder coated, steel. $30 '65 10 bolt rear 3.08 open from my 65 El cam...

67ss · 67ss

Anybody happen to have a non column shift tilt column? Appears to be a one year only column as 66 is not the same. My uncle is looking for one for the car he is restoring.

Jon H · Jon H

This fall I am dropping a 454 into the car so my existing 396 is up for sale. Everything from intake to pan included. Intake # 3933163, rectangular port heads # 3919840, block T0223MQ18N392845, born to a '68 Camaro, adopted by a Chevelle for the past 15 years. PM with with question or details. Avai...

SShink · SShink

During the process of trying to sell my '72, a potential buyer contacted me but he wants to spend $12-15K on a '68-72 Chevelle (lower than what I'm asking). Anyone interested in selling theirs or know of one for sale in this range? He's got young kids but has a passion around Chevelles and wants to joi...

4-door Chevelle · 4-door Chevelle

I appear to have a bent axle on the driver's side of my '72. I am not in a position to put new after-market axles in so with all the 10-bolts going by the way side around here does anyone have a couple spare axles???

bowtie · bowtie

I know very little, my father in law happened on it, guy had it next to his garage. Owner restored another Chevelle and had this one still. F-I-L said it looked good from a distance, it's in primer. Needs engine and trans. I think it was a 70-72 era from what I was told. call for details if interested: Braun...

Scott Parkhurst · Scott Parkhurst

Since I upgraded all my rear suspension stuff, everything I took off is now available. Hotchkis soild lower control arms Hotchkis adjustable upper control arms Hotchkis rear sway bar QA1 single adjustable shocks I'll throw in the Addco front sway bar and mounts, and also a pair of Doetsch Tech ad...

Derek69SS · Derek69SS

68 12-bolt 4.10 posi - just pulled it out of my car... Useable as-is, but the gears are noisy. I replaced the axle bearings and seals, and pinion seal when I put it in my car 3 years ago (around 15,000miles). Posi works good (1.84 60' times on 17" street tires!) Housing was in tough shape when I got it...

bowtie · bowtie

I have a Sony CDP-C910 CD player for a home stereo system. It's a 10 disc unit, has 2 CD cartridges, can play random from one or multiple CDs, has readout of what is left to play on each CD, etc. Was Sony's top model back when it was new. I think I also have the remote for it yet too. Great for garage, home, etc.

bowtie · bowtie

I have a Sirius satellite unit that was my dad's. It also has the speaker unit. Still have the instruction manual, but no vehicle kit.

4-door Chevelle · 4-door Chevelle

I will get the part numbers off the box if anyone is interested. I have 14 springs and 15 lifters for a small block. Obviously there is a story there but am looking to trade/barter or you can just have them for the effort of picking them up!

SShink · SShink

Up for sale is a used exhaust system for '68-72 A Bodies and some KYB shocks that seem to be newer but were just too firm for the ride I want. I tried to cut the exhaust so that it could be pieced back together easily. I think it's 2 1/4" pipe. I'm replacing it because I bought the Pypes system last su...

BB502 · BB502

Anyone have a stock set to sell ?? if there not all the same i need the larger ones. anyone?? 'Thanks Roger

jim larson · jim larson

Anyone have any of the three for sale? Thanks, Jim

Topic		Started By	Replies	Views	Last Post
	Nice 72 for sale (Preview) I ran across this car on my way home yesterday afternoon. I thought I would share in case anyone was interested. http://www.hubgarage.com/mygarage/vehicles/64368 Click on the link if you want to see the pictures full size. The owner has had the car since 1981. It was originally an Arizona car and...	OscarZ	0	778	Sep 15, 2010 by OscarZ
	Parting Out - '96 Buick Roadmaster Sedan (Preview) Yup, the "Northstar Chevelle Club Support Barge" aka "Buford" is available for parts. Already Sold/Spoken for: LT-1 & 4L60e Engine Computer Engine Wiring Harness Available: Everything else! This car has every power-toy & accessory available.	John D	7	1991	Sep 14, 2010 by John D
	WTB 15" wheel (Preview) Now that I have gone to 15" wheels, I realized I needed a 15" spare. Anyone have an extra 15" wheel and maybe a decent tire for a spare for sale for my Chevelle? Thanks. Jon	Jon H	2	740	Sep 14, 2010 by SShink
	WTB 8.5 ring gear posi (Preview) Looking for a 8.5 posi unit if anybody has one laying around. We found a rear end to put under the 55 chavy that came apart at the club picnic. Its a 2.73 one wheel wonder but want to make it a 3.42 posi.	67ss	1	703	Sep 12, 2010 by John D
	anyone have a 96-ish truck 9.5 rear end to sell? (Preview) Kid at work did a burnout, lunched his rear end. Needs a 9.5" rear end. His is a 3.73/posi truck too. I referred him to Libson/Twin City Auto and the salvage yards, but who knows if he'll get around to calling anytime soon.	bowtie	4	908	Sep 11, 2010 by bowtie
	CL 64 4dr wagon, $600 (Preview) http://minneapolis.craigslist.org/ram/pts/1943792379.html	Enganeer	0	755	Sep 11, 2010 by Enganeer
	Here's a lead on a VERY cheap 70 (Preview) A customer told me about a car that he was offered not too long ago. He said it was still there not too long ago still. Hwy 65 and Constance in Ham Lake, go east @ 1/2 mile on LH side. There's a collapsed garage. It's in there. The custoemr told me he was offered it for a couple hundred before the garage went dow...	bowtie	1	771	Sep 8, 2010 by Chris R
	Straub Technologies discount (Preview) It is posted on our member's discount page, but I wanted to make sure everyone had the chance to see it--- Chris Straub at Straub Technologies has offered a discount to our club. His deal is pretty good: Any club member that buys a cam from me gets a $25 off. Any club member that orders a cam and lifter kit ge...	bowtie	0	1232	Aug 28, 2010 by bowtie
	66 Chevellessssssssssss (Preview) Have now sold two of my 66 Chevelle Post cars. Still have four (4) 66 Chevelles left. One is a Factory air 2 door Post car with tinted glass and a Title. Rusty frame. Major resto project. Have another 2dr. post parts car. No engine, trans or interior. Also two (2) four door sedan parts cars. One is a com...	more ambition than brains	1	750	Aug 24, 2010 by 4-door Chevelle
	Desk top computer**free (Preview) I have a 5 year old Dell dimension 3000 desk top that I am getting rid of. Included is a 17" flat panel monitor, keyboard, mouse and computer minus the hard drive. I have been advised to dispose of the hard drive for security reasons. I believe Best Buy and similar places sell hard drives relativ...	Jon H	5	716	Aug 24, 2010 by 4-door Chevelle
	WANTED: 29" tall tires (Preview) This is for the rear of my Chevelle for when I am pulling the camper. 29" keeps my speedo correct. Not picky about anything else but it can't be too wide as the tongue weight pulls the rear down a bit so the tire needs to fit in the wheel well. This can be with or without wheels but prefer steel if with. Ma...	4-door Chevelle	0	700	Aug 24, 2010 by 4-door Chevelle
	78 El Camino for sale $1700 (Preview) Saw it on the way to work. It's white, body is decent, red interior. Cragar wheels. It runs 'cause I don't see it on the way home, tabs are up to date. 763-670-9074 not mine, but I figured I'd pass it on	bowtie	4	884	Aug 20, 2010 by Chris R
	DEREK!!! Vintage oval track chevelle for sale! (Preview) http://cgi.ebay.com/ebaymotors/1971-Chevelle-VINTAGE-race-car-oval-road-course-_W0QQcmdZViewItemQQitemZ150480261292QQptZRaceQ5fCarsQ5fNotQ5fStreetQ5fLegalQ5f	bowtie	3	834	Aug 20, 2010 by Derek69SS
	WTB 1960 348 V8 and Powerglide Transmission (Preview) I am posting this for a potential club member who is trying to locate a 1960 348 v8 and Powerglide transmission for his 1960 El Camino. If anyone knows where to find one, or salvage lots that would be worth calling please let me know so I can pass it on.	69SSConv	5	1367	Aug 20, 2010 by 69SSConv
	SBC alt/PS pump/W Pump/AC Comp and brackets (Preview) Just wanted to let people know my stuiff is available is someone needs it. One PS brackets is kinda custom to work with my headers. AC comp spins freely, only compressor and brackets-no lines/dryer/condenser/etc	bowtie	0	684	Aug 16, 2010 by bowtie
	For sale Gas Dryer (Preview) Bought a new washer and dryer. This is the old dryer, it still works great and is set up for propane. Would like $50.00 for it but make me an offer.	67ss	0	688	Aug 16, 2010 by 67ss
	Cleaning garage. (Preview) Cleaning out the garage today. Windstar electric cooling fan and factory connectors. $25 (2) Taurus fans; One with connector and stock relay box @$20, one with connector end $10 SBC tall valve covers with Chevrolet script, block powder coated, steel. $30 '65 10 bolt rear 3.08 open from my 65 El cam...	Enganeer	3	702	Aug 9, 2010 by Enganeer
	WTB 67 Chevelle tilt steering column (Preview) Anybody happen to have a non column shift tilt column? Appears to be a one year only column as 66 is not the same. My uncle is looking for one for the car he is restoring.	67ss	5	1420	Aug 8, 2010 by 67ss
	1968 396ci 375hp, L78 For Sale (Preview) This fall I am dropping a 454 into the car so my existing 396 is up for sale. Everything from intake to pan included. Intake # 3933163, rectangular port heads # 3919840, block T0223MQ18N392845, born to a '68 Camaro, adopted by a Chevelle for the past 15 years. PM with with question or details. Avai...	Jon H	3	1194	Aug 1, 2010 by Jon H
	Someone WTB '68-72 Chevelle up to $15K (Preview) During the process of trying to sell my '72, a potential buyer contacted me but he wants to spend $12-15K on a '68-72 Chevelle (lower than what I'm asking). Anyone interested in selling theirs or know of one for sale in this range? He's got young kids but has a passion around Chevelles and wants to joi...	SShink	2	866	Aug 1, 2010 by OscarZ
	WANTED: Axle for my 10-bolt (Preview) I appear to have a bent axle on the driver's side of my '72. I am not in a position to put new after-market axles in so with all the 10-bolts going by the way side around here does anyone have a couple spare axles???	4-door Chevelle	5	903	Jul 14, 2010 by 4-door Chevelle
	Chevelle for sale up north near Moose Lake area (Preview) I know very little, my father in law happened on it, guy had it next to his garage. Owner restored another Chevelle and had this one still. F-I-L said it looked good from a distance, it's in primer. Needs engine and trans. I think it was a 70-72 era from what I was told. call for details if interested: Braun...	bowtie	0	634	Jul 12, 2010 by bowtie
	Rear suspension goodies! (Preview) Since I upgraded all my rear suspension stuff, everything I took off is now available. Hotchkis soild lower control arms Hotchkis adjustable upper control arms Hotchkis rear sway bar QA1 single adjustable shocks I'll throw in the Addco front sway bar and mounts, and also a pair of Doetsch Tech ad...	Scott Parkhurst	7	979	Jul 10, 2010 by Scott Parkhurst
	(3) 12-bolts for sale (Preview) 68 12-bolt 4.10 posi - just pulled it out of my car... Useable as-is, but the gears are noisy. I replaced the axle bearings and seals, and pinion seal when I put it in my car 3 years ago (around 15,000miles). Posi works good (1.84 60' times on 17" street tires!) Housing was in tough shape when I got it...	Derek69SS	9	1168	Jul 8, 2010 by Derek69SS
	Sony home CD changer $35 or 2 cases of beer (Preview) I have a Sony CDP-C910 CD player for a home stereo system. It's a 10 disc unit, has 2 CD cartridges, can play random from one or multiple CDs, has readout of what is left to play on each CD, etc. Was Sony's top model back when it was new. I think I also have the remote for it yet too. Great for garage, home, etc.	bowtie	3	2227	Jul 7, 2010 by bowtie
	Sirius satellite unit with speaker unit $75 (Preview) I have a Sirius satellite unit that was my dad's. It also has the speaker unit. Still have the instruction manual, but no vehicle kit.	bowtie	0	647	Jul 6, 2010 by bowtie
	Comp springs and lifters (Preview) I will get the part numbers off the box if anyone is interested. I have 14 springs and 15 lifters for a small block. Obviously there is a story there but am looking to trade/barter or you can just have them for the effort of picking them up!	4-door Chevelle	2	676	Jul 4, 2010 by 4-door Chevelle
	'68-72 Chevelle Exhaust and Shocks For Sale (Preview) Up for sale is a used exhaust system for '68-72 A Bodies and some KYB shocks that seem to be newer but were just too firm for the ride I want. I tried to cut the exhaust so that it could be pieced back together easily. I think it's 2 1/4" pipe. I'm replacing it because I bought the Pypes system last su...	SShink	4	852	Jul 4, 2010 by SShink
	68 lower control arms for a impala (Preview) Anyone have a stock set to sell ?? if there not all the same i need the larger ones. anyone?? 'Thanks Roger	BB502	1	691	Jun 28, 2010 by Enganeer
	66 BB Harmonic balancer, timing cover, & oil pan (Preview) Anyone have any of the three for sale? Thanks, Jim	jim larson	2	855	Jun 23, 2010 by jim larson
«First < 1 … 23 24 25 26 > Last» \| Page of 26 sorted by