Discussion Forum - Northstar Chevelle Club

Members Login
Username 
 
Password 
    Remember Me  
Post Info TOPIC: LS head casting numbers list


Secretary

Status: Offline
Posts: 2988
Date:
LS head casting numbers list
Permalink  
 


I came across this today, thought I would pass it on to everyone, especially those who are interested in the LS engines

 

Small Block Chevy LS Cylinder Heads by Casting Number

10215339 – LS Small Block V8 1997 346, LS1, aluminum, 68cc chambers

12480005 – LS Small Block V8 2000 LS1, GTZ, aluminum, 38cc chambers, 2.125/1.625 valves, angle plugs

12556743 – LS Small Block V8 1999 325, 5.3L, aluminum, truck, van

12558806 – LS Small Block V8 1997-1998 346, LS1, aluminum, 68cc chambers

12559853 – LS Small Block V8 1999 346, LS1, aluminum, 68cc chambers

12559862 – LS Small Block V8 1999-2000 aluminum, LS, 4.8 or 5.3L

12559895 – LS Small Block V8 2000 325 (5.3L) aluminum

12561706 – LS Small Block V8 2001-2004 325 (5.3L) aluminum

12561873 – LS Small Block V8 1999-2001 364, 6.0L, LS, 71cc chambers, cast iron

12562317 – LS Small Block V8 2001-2004 364, 6.0L, LS, 71cc chambers, aluminum

12564241 – LS Small Block V8 2000 346, LS1, aluminum, 68cc chambers

12564243 – LS Small Block V8 2001 346 (5.7L LS6) or 364 (6.0L LS2), aluminum

12572035 – LS Small Block V8 2001-2004 364, 6.0L, LS, aluminum, 71cc chambers

12550592 – LS Small Block V8 1997-up 346, LS1

12559846 – LS Small Block V8 1998-up 346, LS1

12560621 – LS Small Block V8 1998-up 346, LS1

12562174 – LS Small Block V8 1998-up 346, LS1

10106178 – LT Small Block V8 1990 350, LT5, Corvette ZR1, DOHC 32-valve, aluminum, passenger side head

10106179 – LT Small Block V8 1990 350, LT5, Corvette ZR1, DOHC 32-valve, aluminum, drivers side head

10125320 – LT Small Block V8 1994-1996 350, LT1, cast iron, Caprice 9C1 Police, Impala SS, Cadillac Fleetwood, Buick Roadmaster, reverse flow cooling

10128374 – LT Small Block V8 1992 350, LT1, 53cc chambers, angle plugs, aluminum, reverse flow cooling, 175cc intake ports, 68cc exhaust ports

10174389 – LT Small Block V8 1991-1995 350, LT5, Corvette ZR1, DOHC 32-valve, driver side, aluminum

10174390 – LT Small Block V8 1991-1995 350, LT5, Corvette ZR1, DOHC 32-valve, passenger side, aluminum

10205245 – LT Small Block V8 1993 350, LT1, aluminum, reverse flow cooling, 175cc intake ports, 68cc exhaust ports

10207643 – LT Small Block V8 1994-1996 350, LT1, aluminum, reverse flow cooling, 175cc intake ports, 68cc exhaust ports

10208890 – LT Small Block V8 1994-1996 265, Baby LT1, L99, cast iron, reverse flow cooling

10225121 – LT Small Block V8 1994-1995 350, LT5, Corvette ZR1, DOHC 32-valve, drivers side, aluminum

10225122 – LT Small Block V8 1995 350, LT5, Corvette ZR1, DOHC 32-valve, passenger side, aluminum

10239902 – LT Small Block V8 1996 350, LT4, aluminum, reverse flow cooling, 195cc intake ports, 54cc chamber, angle plugs

12529742 – LT Small Block V8 1995-1996 265, Baby LT1, L99, cast iron

12551561 – LT Small Block V8 1996 350, LT1, aluminum, reverse flow cooling

12554290 – LT Small Block V8 1994-1996 350, LT1, Caprice 9C1 Police, Impala SS, Cadillac Fleetwood, Buick Roadmaster, reverse flow cooling

12554291 – LT Small Block V8 1995-1996 265, Baby LT1, L99, cast iron

12555690 – LT Small Block V8 1996 350, LT4, aluminum, reverse flow cooling

14088526 – LT Small Block V8 350, LT1, aluminum



__________________

Bryan-NW 'burbs
1972 Malibu
Vaguely stock appearing, and the opposite of restored.
1999 std bore 5.7, Vortec heads, Holley Stealth Ram, GM cam
700R4, Viking coilovers, 12 bolt 4.10 posi, and a whole bunch more



Founding Member

Status: Offline
Posts: 2740
Date:
Permalink  
 

Useful list, but it needs to be updated... nothing newer than 2004 on it.

Thanks for posting it though! :)

__________________

Derek Kiefer - Mantorville, MN

69 Malibu Pro-Touring stroker LS1-383/T56 - 69 SS396-325/3spd project



Super Poster

Status: Offline
Posts: 603
Date:
Permalink  
 

It is interesting, I never knew they made a steel casting, looks like they were on 99-00 LQ4 motors.   The easiest way to ID the LS heads is the 3 digit casting number on the spark plug side of the head.  Bryan's list has part numbers, and several part numbers were made from the same casting.   The 243 or 799 casting are the most popular Gen 3 head.  

Here's more reading than you ever cared to do on LS heads:


933 97 aluminum perimeter bolt 5.7
806 97-98 aluminum perimeter bolt 5.7 
853 99-00 aluminum center bolt 5.7 
241 01-03 aluminum center bolt 5.7 (some late MY00 cars got 241 castings)
243 04 up LS6 aluminum center bolt 5.7 ***These castings were also used around 05 in truck applications***
862 99 and up 4.8-5.3 Truck heads 
706 99 and up 4.8-5.3 Truck heads
799 05 and up 4.8-5.3Truck heads ***reportedly came on a few corvette's too*** These are basically 243 Heads
873 99-00 LQ4 6.0 Iron center bolt heads 
317 01 and up LQ4 and LQ9 6.0 aluminum center bolt heads 
035 01 - 04 LQ9 6.0 aluminum center bolt heads 

Even more detailed info: 

Casting Numbers 241, 806, 853 
Head: 1997+ LS1 5.7 Liter Passenger Car 
Material: Aluminimum 
Part Number: 
12559806 (1997-98) Chambers = 69cc
12559853 (1999-00) 
12564241 (2000-03) 
Combustion Chamber Volume: 66.67cc 
Compression Ratio: 10.1:1 
Intake Port Volume: 200cc 
Exhaust Port Volume: 70cc 
Intake Valve Diameter: 2.00 inches 
Exhaust Valve Diameter: 1.55 inches 

Stock Head Flow Numbers 
Chamber 66.67 cc------0.100--0.200---0.300---0.400---0.500---0.550--0.600 
Intake 200 cc------------67----122-----178-----215-----219-----223---227 
Exhaust 70 cc------------52-----97-----133-----156-----170-----76----180 


What you need to know: 
The standard issue LS1 heads is best all-around head for the street / strip engines . A thorough porting and millimg job plus a valve upgrade on these will really wake up your engine.The heads have undergone only minor revisions since their introduction in 1997 , most notably a switch from perimeter to center valvcover bolt configuration for the 1999 model year. Each style has its own dedicated valvecovers and coilpacks mounting apparatus.



Casting Number 243
Head: 2001 LS6 5.7 Liter Passenger Car 
Material: Aluminimum 
Part Number: 
12564243 
Combustion Chamber Volume: 64.45cc 
Compression Ratio: 10.5:1 
Intake Port Volume: 210cc 
Exhaust Port Volume: 75cc 
Intake Valve Diameter: 2.00 inches 
Exhaust Valve Diameter: 1.55 inches 

Stock Head Flow Numbers
Chamber 64.45 cc-------0.100---0.200--0.300--0.400---0.500---0.550---0.600 
Intake 210 cc------------62------126----184----224-----251----256----257 
Exhaust 75 cc------------57------108----143----163-----176----180----183


What you need to know: 
The LS6 cylinder heads is essentially a tuned-up version of the LS1 head. At 65cc, the combustion chamber is slightly smaller and more efficient than the LS1. The more efficient design shortens burn times and ultimately means less ignition timing advance is required to produce the same power. And because less timing allows more efficient combustion, the Ls6 heads allow the engine to produce more torque. The exhaust port is a unique D-shape that improves flow. LS6 heads are the best choice only when all-out power is needed. Be prepared for a big price tag at the dealer or steep core charge from your head porter.



Casting Number 706 and 862
Head: 1999+ 4.8L / 5.3 Liter Truck 
Material: Aluminimum 
Part Number: 
12559862 
12561706 
Combustion Chamber Volume: 61.15cc 
Compression Ratio: 9.5:1 
Intake Port Volume: 200cc 
Exhaust Port Volume: 70cc 
Intake Valve Diameter: 1.89 inches 
Exhaust Valve Diameter: 1.55 inches 

Stock Head Flow Numbers
Chamber 61.15 cc----0.100--0.200--0.300-- 0.400--0.500---0.550---0.600 
Intake 200 cc----------63 ---128----179-----210----218----221-----226 
Exhaust 70 cc----------54 -- 93 ----121----145-----163----168----174 


What you need to know: 
These small combustion chamber truck heads offer no advantage over an LS1 head except the smaller combustion chamber. This along with milling of the deck surface will allow a slightly higher compression ratio to be achieved. Because of the smaller intake valve installed in these heads a valve upgrade is practically mandatory.



Casting Number 873
Head: 1999-2000 LQ4 6.0 Liter Truck 
Material: ***Cast Iron***
Part Number: 
12561873 
Combustion Chamber Volume: 71.06cc 
Compression Ratio: 9.5:1 
Intake Port Volume: 210cc 
Exhaust Port Volume: 75cc 
Intake Valve Diameter: 2.00 inches 
Exhaust Valve Diameter: 1.55 inches 

Casting Number 317, 035 
Head: 2001+ LQ4 and LQ9 6.0 Liter Truck 
Material: Aluminimum 
Part Number: 
12562317 -LQ4
12572317 -LQ9
12572035 -LQ9
Combustion Chamber Volume: 71.06cc 
Compression Ratio: 10:1 LQ9 Flat top pistons
Compression Ratio: 9.6:1 LQ4 Dish piston
Intake Port Volume: 210cc 
Exhaust Port Volume: 75cc 
Intake Valve Diameter: 2.00 inches 
Exhaust Valve Diameter: 1.55 inches

Stock Head Flow Numbers
Chamber 71.06cc----0.100---0.200--0.300--0.400--0.500--0.550--0.600 
Intake 210cc-----------66-----142-----196---228----236---238-----240 
Exhaust 75cc----------59-----104-----137---155----167---173-----177 



What you need to know: 
The LQ4 head received aluminum heads starting in models year 2001. All other features are the same as previous years iron heads. This is the workhorse head for street / strip turbo and blower cars. They offer a large combustion chamber that lowers compression ratio making them perfect for a forced induction application. Swapping on the LQ4 head drops the compression ratio of a typical LS1 engine to 9:5.1 
The Cast-iron casting are heavy!

So you want to figure out how much to mill:

It takes about .005" milling of the block deck to remove 1cc of volume. It takes .007" milling to remove 1cc from an LS1 head 

Simple Milling Math:

You have a stock 66cc chamber and you want to get down to 63cc

66-63 = 3. You have to remove 3cc's

.007 x 3 = .021. So to get your 66cc chambers down to 63cc you'd have to mill ~.021.

You can also do the reverse, say you want to mill a head .030 to figure out how many CC's that removes you take .030 / .007 = ~ 4.28. Milling a stock 5.7 head .030 puts your chamber at ~ 62.



241 cast heads were Die Cast which is a process that smooths up the ports a bit compared to the Sand Cast procedure that was done on the 806 and 853 heads. Once ported any "advantage" the 241 cast had is moot.

Same Info applies to the: 
4.8L/5.3L Truck 862 and 706 Head castings
While the 706 Heads are a SPM = Semi Permanent-mold And considerd to be a more consistant head casting then the 862 wich are Sand cast, Once ported There Is no difference.

--------------------------------------------------------------------------------
799 Vs. 243 Info Copied From pillboxesghost Post's in ths threadhttp://www.ls1tech.com/forums/conver...l#post10241473

This appears to be one of the common misconceptions about heads having the 243 casting no. -- they are not necessarily LS6 head assemblies. The LS2 heads (243 or 799 casting) have the "heavy" standard LS1 valves. However, they do have the LS6 springs.

Only the true LS6 engine heads have stainless steel (not titanium) hollow stem valves (the exhaust stems are sodium filled). These valves are slightly longer than LS1 valves too.

The LS7 heads do have titanium valves.

New LS2 heads are about half the price of new LS6 heads (check sdparts.com). GM is "really proud" of those hollow stem valves!

Oh, if you have the 799 castings -- the only thing "Corvette" about them is the valve springs/retainers! Still a desirable set of LS1 heads though!

Supposedly, the 243 mold was done at GM Research, the 799 mold furnished to other vendors. The same vendor may have the 243 and 799 mold. 

Both heads have identical sized intake and exhaust valves



__________________

Steve S. - Fountain, MN

 

1972 Chevelle - 383 stroked LS1/4L60E - SOLD!



Secretary

Status: Offline
Posts: 2988
Date:
Permalink  
 

Yeah, I just nabbed it off another website, who got it off another, etc. If I come across a more encompassing one, I'll post it.

__________________

Bryan-NW 'burbs
1972 Malibu
Vaguely stock appearing, and the opposite of restored.
1999 std bore 5.7, Vortec heads, Holley Stealth Ram, GM cam
700R4, Viking coilovers, 12 bolt 4.10 posi, and a whole bunch more



2K+ Club

Status: Offline
Posts: 2788
Date:
Permalink  
 

Added this to our "Tips & Tricks" page on the website - Thanks guys!!



__________________

 

John D. - St. Louis Park, MN.

1965 El Camino - LT-1, 4L60e, 4wh discs, SC&C susp.
2013 F-150 Platinum - Twin Turbo 3.5

2018 Factory Five MkIV Roadster build thread

Page 1 of 1  sorted by
 
Quick Reply

Please log in to post quick replies.

Chatbox
Please log in to join the chat!