As I already posted that we are moving to KC, I need to purge some things. Here's what I have so far on the Free Stuff:
-1968 Vintage cast iron 4 barrel intake manifold-FREE
-1968 SBC cast iron exhaust manifolds-FREE
-1972 Drum brake booster-FREE
-1971-1972 Black interior door panels (Well used)-FREE
-1970 Rear lower valance panel-FREE
-2 Ea. AC evap boxes (1 is a '70 from John E.'s Elky, and I think the other came from Derek?)-FREE
-1972 Stock steering box (Worked fine, replaced it with the Jeep box)-FREE
-Forgot to get a pic, but I have a '70-72 deck lid that has some small rust pitting. It is already primed. I will add a pic later-FREE
FOR SALE:
-2 ea. Front '71 to 72 Bumpers (O.K. daily drivers, but I was hanging on to them since they are original GM, and good replating cores)-$25 Ea. to NCC Members
-1970 SBC AC Compressor with brackets (From John E.'s Elky tear down)-$25
I leave for KC Saturday, so let me know if you want any of this, and I'd prefer that you take it now, but can hold it until May 1st if needed. I can also meet part way in the metro if it helps to hand it off.
i may want the drum brake with booster. long story as to why.
what it the length from the from of the booster to the end of the master cylinder?
i just want the master cylinder
Derek69SS said
Mar 15, 2015
I'll take the trunk lid if I can figure out a time to come get it.
SShink said
Mar 15, 2015
Derek69SS wrote:
I'll take the trunk lid if I can figure out a time to come get it.
It's yours Derek. If you or Steve S. go to the April meeting, you can stop by and pick it up at my place. We will be there until the first week in May.
SShink said
Mar 15, 2015
Forgot I have a ceiling fan and light fixture too. Both FREE.
72 Stock steering box.. Is it a manual box? If so I would be interested..
SShink said
Mar 15, 2015
BLyke wrote:
i may want the drum brake with booster. long story as to why. what it the length from the from of the booster to the end of the master cylinder? i just want the master cylinder
Bruce, from the outside of the booster to the end of the master is 8". Sorry, it's a pkg. deal, so you get both the booster and the master if you want it?
SShink said
Mar 15, 2015
Back in Black wrote:
I'll take the satin nickel light fixture.
Do you still have that sweep dash?
The satin light fixture is yours Keith. I have the sweep dash if you still want it.
SShink said
Mar 15, 2015
Tony Hoffer wrote:
72 Stock steering box.. Is it a manual box? If so I would be interested..
Tony, it's a power steering box.
BLyke said
Mar 17, 2015
SShink wrote:
BLyke wrote:
i may want the drum brake with booster. long story as to why. what it the length from the from of the booster to the end of the master cylinder? i just want the master cylinder
Bruce, from the outside of the booster to the end of the master is 8". Sorry, it's a pkg. deal, so you get both the booster and the master if you want it?
Understood, let me see if it will fit between the firewall and the oil filter on the 235.
i will let you know by tonight after i can measure the space (and if someone else really needs it let them have it)
Thanks
Update -- took a measurement and it will not
thanks
-- Edited by BLyke on Tuesday 17th of March 2015 05:38:39 AM
-- Edited by BLyke on Tuesday 17th of March 2015 06:11:19 AM
SShink said
Mar 20, 2015
Light fixture, steering box, and trunk lid are gone. Thanks Keith for picking them up!
Anyone else interested in the remaining stuff?
-1968 Vintage cast iron 4 barrel intake manifold-FREE
-1968 SBC cast iron exhaust manifolds-FREE
-1972 Drum brake booster-FREE
-1971-1972 Black interior door panels (Well used)-FREE
-1970 Rear lower valance panel-FREE
-2 Ea. AC evap boxes (1 is a '70 from John E.'s Elky, and I think the other came from Derek?)-FREE
FOR SALE:
-2 ea. Front '71 to 72 Bumpers (O.K. daily drivers, but I was hanging on to them since they are original GM, and good replating cores)-$25 Ea. to NCC Members
-1970 SBC AC Compressor with brackets (From John E.'s Elky tear down)-$25
SShink said
Mar 31, 2015
SShink wrote:
-1968 Vintage cast iron 4 barrel intake manifold-FREE
-1968 SBC cast iron exhaust manifolds-FREE
-1972 Drum brake booster-FREE
-1971-1972 Black interior door panels (Well used)-FREE
-1970 Rear lower valance panel-FREE
-2 Ea. AC evap boxes (1 is a '70 from John E.'s Elky, and I think the other came from Derek?)-FREE
FOR SALE:
-2 ea. Front '71 to 72 Bumpers (O.K. daily drivers, but I was hanging on to them since they are original GM, and good replating cores)-$25 Ea. to NCC Members
-1970 SBC AC Compressor with brackets (From John E.'s Elky tear down)-$25
Last chance.... the free stuff is going in the garbage and to the metal scrap pile Friday...
Dan Williams said
Mar 31, 2015
Good luck with that. Got quite the pile of metal out to the shop from the winter, good stuff like rotors, drums axles etc and wanted to spring clean it out. My scrap guy wanted me to pay him to come get it. I'll guilt him into coming out as I am not going to turn into his commodity broker. He only wants to show up when prices are high or I have a convertor or two laying around and I have never charged him anything for the easiest pick up ever, all stacked dry right in the door. Last guy I had wanted me to just leave it outside (which I hate that stuff outside) and he would take his time coming after it. Last time I had a catalytic convertor on the bottom of the pile and he dragged it out spreading crap everywhere. Called him and he just says that was all he wanted. Saw his truck about 8 miles out of town a month or so later and found him walking a mile up the road to town with a gas can. Stopped long enough to say it looked like a nice day for a walk. carma
SShink said
Apr 1, 2015
The scrap iron will go to the Goodyear store right by my house. I've spent so much there that they take it no questions asked and add it to their scrap pile.
As I already posted that we are moving to KC, I need to purge some things. Here's what I have so far on the Free Stuff:
-1968 Vintage cast iron 4 barrel intake manifold-FREE
-1968 SBC cast iron exhaust manifolds-FREE
-1972 Drum brake booster-FREE
-1971-1972 Black interior door panels (Well used)-FREE
-1970 Rear lower valance panel-FREE
-2 Ea. AC evap boxes (1 is a '70 from John E.'s Elky, and I think the other came from Derek?)-FREE
-1972 Stock steering box (Worked fine, replaced it with the Jeep box)-FREE
-Forgot to get a pic, but I have a '70-72 deck lid that has some small rust pitting. It is already primed. I will add a pic later-FREE
FOR SALE:
-2 ea. Front '71 to 72 Bumpers (O.K. daily drivers, but I was hanging on to them since they are original GM, and good replating cores)-$25 Ea. to NCC Members
-1970 SBC AC Compressor with brackets (From John E.'s Elky tear down)-$25
I leave for KC Saturday, so let me know if you want any of this, and I'd prefer that you take it now, but can hold it until May 1st if needed. I can also meet part way in the metro if it helps to hand it off.
Post or PM me if you have questions.
Thanks!
what it the length from the from of the booster to the end of the master cylinder?
i just want the master cylinder
It's yours Derek. If you or Steve S. go to the April meeting, you can stop by and pick it up at my place. We will be there until the first week in May.
Forgot I have a ceiling fan and light fixture too. Both FREE.
Do you still have that sweep dash?
Bruce, from the outside of the booster to the end of the master is 8". Sorry, it's a pkg. deal, so you get both the booster and the master if you want it?
The satin light fixture is yours Keith. I have the sweep dash if you still want it.
Tony, it's a power steering box.
Understood, let me see if it will fit between the firewall and the oil filter on the 235.
i will let you know by tonight after i can measure the space (and if someone else really needs it let them have it)
Thanks
Update -- took a measurement and it will not
thanks
-- Edited by BLyke on Tuesday 17th of March 2015 05:38:39 AM
-- Edited by BLyke on Tuesday 17th of March 2015 06:11:19 AM
Light fixture, steering box, and trunk lid are gone. Thanks Keith for picking them up!
Anyone else interested in the remaining stuff?
-1968 Vintage cast iron 4 barrel intake manifold-FREE
-1968 SBC cast iron exhaust manifolds-FREE
-1972 Drum brake booster-FREE
-1971-1972 Black interior door panels (Well used)-FREE
-1970 Rear lower valance panel-FREE
-2 Ea. AC evap boxes (1 is a '70 from John E.'s Elky, and I think the other came from Derek?)-FREE
FOR SALE:
-2 ea. Front '71 to 72 Bumpers (O.K. daily drivers, but I was hanging on to them since they are original GM, and good replating cores)-$25 Ea. to NCC Members
-1970 SBC AC Compressor with brackets (From John E.'s Elky tear down)-$25
Last chance.... the free stuff is going in the garbage and to the metal scrap pile Friday...
Good luck with that. Got quite the pile of metal out to the shop from the winter, good stuff like rotors, drums axles etc and wanted to spring clean it out. My scrap guy wanted me to pay him to come get it. I'll guilt him into coming out as I am not going to turn into his commodity broker. He only wants to show up when prices are high or I have a convertor or two laying around and I have never charged him anything for the easiest pick up ever, all stacked dry right in the door. Last guy I had wanted me to just leave it outside (which I hate that stuff outside) and he would take his time coming after it. Last time I had a catalytic convertor on the bottom of the pile and he dragged it out spreading crap everywhere. Called him and he just says that was all he wanted. Saw his truck about 8 miles out of town a month or so later and found him walking a mile up the road to town with a gas can. Stopped long enough to say it looked like a nice day for a walk.
carma
The scrap iron will go to the Goodyear store right by my house. I've spent so much there that they take it no questions asked and add it to their scrap pile.