This is a 1967 dash that has been powder coated. Very nice finish. Open to reasonable offers from members. I will be listing it on craigslist too.
-- Edited by Lost in the 60s on Saturday 8th of November 2014 02:06:52 PM
-- Edited by Lost in the 60s on Wednesday 1st of April 2015 09:59:28 PM
more ambition than brains said
Nov 4, 2014
Mitch,
I think I actually have a Blue one I picked up in Iowa 9-10 years ago.
Will be at Storage Building in South ST. Paul Saturday Morning.
Call me if you want to stop by.
ALSO, Chris this would be a good time to look for the A/C 66 lower panel you were looking for.
Karl
Lost in the 60s said
Nov 8, 2014
Thanks to Karl, I have a '66 dash to paint.
I discovered the black dash is a '67.
BB502 said
Nov 8, 2014
whats the difference in 66 to 67 ??
Lost in the 60s said
Nov 8, 2014
BB502 wrote:
whats the difference in 66 to 67 ??
The steering column opening is wider and the mount is different for the collapsible column introduced in '67. The holes above the glove box are different too for the bezel. 66 has small holes around the perimeter.
Derek69SS said
Nov 9, 2014
It's a bit of work, but when we had the green 66 wagon, I put a 67 dash in it because I wanted the collapsible column.
Lost in the 60s said
Nov 9, 2014
Derek69SS wrote:
It's a bit of work, but when we had the green 66 wagon, I put a 67 dash in it because I wanted the collapsible column.
Wouldn't be any extra work for me at this point but I just sold the extra '67 column I had here for 3 years from the GTO a couple weeks before I bought this car...
Chris R said
Nov 9, 2014
It still would have required some work though. The Chevelle column in 67 was Chevelle only, the BOP A bodies had columns that were totally different. At least thats what I understand from reading postings on Team Chevelle over the years from posters like Dale Mcintosh.
Lost in the 60s said
Nov 9, 2014
Chris R wrote:
It still would have required some work though. The Chevelle column in 67 was Chevelle only, the BOP A bodies had columns that were totally different. At least thats what I understand from reading postings on Team Chevelle over the years from posters like Dale Mcintosh.
I did a lot of reading about that argument both ways over the years. Some people swear they are different and others say not. I actually sold the GTO column to a guy with an El Camino. He was converting from a column shift to floor. He measured his against mine and they were the same...
BB502 said
Nov 12, 2014
They may measure the same but i'm sure the shape of thr bowl is different.
This is a 1967 dash that has been powder coated. Very nice finish. Open to reasonable offers from members. I will be listing it on craigslist too.
-- Edited by Lost in the 60s on Saturday 8th of November 2014 02:06:52 PM
-- Edited by Lost in the 60s on Wednesday 1st of April 2015 09:59:28 PM
I think I actually have a Blue one I picked up in Iowa 9-10 years ago.
Will be at Storage Building in South ST. Paul Saturday Morning.
Call me if you want to stop by.
ALSO, Chris this would be a good time to look for the A/C 66 lower panel you were looking for.
Karl
I discovered the black dash is a '67.
The steering column opening is wider and the mount is different for the collapsible column introduced in '67. The holes above the glove box are different too for the bezel. 66 has small holes around the perimeter.
Wouldn't be any extra work for me at this point but I just sold the extra '67 column I had here for 3 years from the GTO a couple weeks before I bought this car...
It still would have required some work though. The Chevelle column in 67 was Chevelle only, the BOP A bodies had columns that were totally different. At least thats what I understand from reading postings on Team Chevelle over the years from posters like Dale Mcintosh.
I did a lot of reading about that argument both ways over the years. Some people swear they are different and others say not. I actually sold the GTO column to a guy with an El Camino. He was converting from a column shift to floor. He measured his against mine and they were the same...