Is there any value, other than scrap, for a 1969 4-bolt main block bored .060 over with piston #7 having a hole in the middle, piston might even be cracked and the cylinder wall is scored??? A small nut worked its way in to the cylinder. I have to get rid of it tomorrow. Thoughts!
67ss said
Jun 5, 2014
I have a freshly machined 2 bolt block, just the block no internals I would sell if interested. It is 30 over, 0 decked, mains line honed, new cam bearings and frost plugs. Buy a set of pistons make sure the rod is not bent and transfer all the parts from your junk block. PM me if you are interested.
stldrgn said
Jun 5, 2014
you can sell the caps on ebay I have one of those 7 cylinders also laying by my garage it came with a 3 piece camshaft
-- Edited by stldrgn on Thursday 5th of June 2014 03:28:08 PM
4-door Chevelle said
Jun 5, 2014
Being I have nowhere to store it and the machinist called it junk it is gone. I will keep that block in mind though. I slammed another 350 in it, just finished it up today because tomorrow I head to Brainerd for the races! I sure hope it will run at least 13.99 in the quarter because that is my class limit!!! Nice camshaft you have there.
bowtie said
Jun 6, 2014
Sounds like it's a 3/4 race cam. Good thing it wasn't a full race cam or you'd have 4 pieces
4-door Chevelle said
Mar 15, 2015
I am having a 383 Stroker put together that a friend of mine has in his shop. He is providing the bottom end and I am providing the top end. It will all be gone through at the machine shop and assembled by him. This should be my fastest combo yet so I will want to get it on the dyno.
Is there any value, other than scrap, for a 1969 4-bolt main block bored .060 over with piston #7 having a hole in the middle, piston might even be cracked and the cylinder wall is scored??? A small nut worked its way in to the cylinder. I have to get rid of it tomorrow. Thoughts!
I have a freshly machined 2 bolt block, just the block no internals I would sell if interested. It is 30 over, 0 decked, mains line honed, new cam bearings and frost plugs. Buy a set of pistons make sure the rod is not bent and transfer all the parts from your junk block. PM me if you are interested.
you can sell the caps on ebay I have one of those 7 cylinders also laying by my garage it came with a 3 piece camshaft
-- Edited by stldrgn on Thursday 5th of June 2014 03:28:08 PM
Sounds like it's a 3/4 race cam. Good thing it wasn't a full race cam or you'd have 4 pieces