Currie bolt-in 9-inch rear axle, Hotchkis front spindles
Scott Parkhurst said
Mar 2, 2014
Hey all...I still have a new Currie bolt-in 9-inch for sale. I got it for a past project that I sold off,so it's never been used. It's 3 inches narrower than stock and was ordered for a '65, but will fit under 64-72 cars without major mods. Has the flat spring pads for '65-'67. Full of all the good 9-plus stuff..31 spline high strength axles, Torino bearings, Chevy bolt pattern. I have a center section in it now- nodular unit with Detroit Locker and 4.30:1 Currie gears. All built by Currie and new as delivered. Housing, axles and Baer drilled discs (no calipers or brackets, just discs) $1,000...complete unit with center section $2,000. Center section alone $1,250.
Also have a pair of Hotchkis Impala spindles available. New, never used. $250/pr.
Call me at home 952 873 6670 or e-mail at Wrdsmth495@Yahoo
Scott
John D said
Mar 3, 2014
Must Resist... think A/C... Must Resist...
(Why do you taunt me this way Scott?)
Scott Parkhurst said
Mar 3, 2014
I can't help it. I'm an instigator. An enabler. A trouble maker. I thought all of you knew this about me by now? Don't go out drinking with me. That's all I'm saying...
Lost in the 60s said
Mar 3, 2014
If it was a leaf spring axle, I would have a buyer for it...
Scott Parkhurst said
Mar 17, 2014
Okay- it looks like the center section will be sold separately...so, the 9-inch housing and axles will be available without a third member for $1,000. I will include drilled Baer discs. All new stuff!
Hey all...I still have a new Currie bolt-in 9-inch for sale. I got it for a past project that I sold off,so it's never been used. It's 3 inches narrower than stock and was ordered for a '65, but will fit under 64-72 cars without major mods. Has the flat spring pads for '65-'67. Full of all the good 9-plus stuff..31 spline high strength axles, Torino bearings, Chevy bolt pattern. I have a center section in it now- nodular unit with Detroit Locker and 4.30:1 Currie gears. All built by Currie and new as delivered. Housing, axles and Baer drilled discs (no calipers or brackets, just discs) $1,000...complete unit with center section $2,000. Center section alone $1,250.
Also have a pair of Hotchkis Impala spindles available. New, never used. $250/pr.
Call me at home 952 873 6670 or e-mail at Wrdsmth495@Yahoo
Scott
(Why do you taunt me this way Scott?)
If it was a leaf spring axle, I would have a buyer for it...
currieenterprises2.reachlocal.net/cestore/productsCR.aspx
Just gotta keep poking at us, don't ya...
Any use for a '71 12 bolt with 4.56 posi as partial trade
I've got all the rear axles I need...in fact, one too many!
These things are heavy and take up a lot of room too.
I bet someone in this club would like that 12-bolt with 4.56s though..!