If anybody has a set let me know how much you want for them.
Thanks
SShink said
Nov 20, 2012
Chris, I have a pair off a '68 327 that was in an Impala. Would those work?
I can provide pics tonight if it might be what you need.
67ss said
Nov 20, 2012
I think the Impala's all had ram horn style manifolds. But let me know maybe somebody swapped something else to the engine.
SShink said
Nov 21, 2012
They are the straight version, not the ram's horn. I'll take some pics and will post them tonight.
67ss said
Nov 21, 2012
Cool, if you are able to read the casting numbers could you post those also.
Thanks
SShink said
Nov 21, 2012
67ss wrote:
Cool, if you are able to read the casting numbers could you post those also.
Thanks
Chris, I attached pics for you to see. I can only read one of the casting numbers; 336710 When I google it, it shows as a '74-78 Chevelle, Camaro, and Nova casting.
All I can tell you is that they fit the '72 Chevelle they were on with the car when I bought it.
If they work for you, great. If not, they are going to the scrap yard over the Christmas break along with 4 front '71/72 bumpers, old suspension springs, a '68 327 4 barrel intake manifold, and other steel/iron I've been storing for far too long.
Thanks Stan those are close but I would like to find a closer year set to match my car. But again thanks for the pictures.
SShink said
Nov 21, 2012
No worries Chris. They will go to the scrap yard the end of Dec. since I've been kicking them around for about 10 years now and nobody wants them...
Chris R said
Nov 21, 2012
Donate them to the club for a raffle perhaps? I might be able to put them to use. My 76 GMC half has some issues with the flange to the exhaust pipe on the passenger side. I never mess with it since they are a dime a dozen but I did have to do some welding on it when I got it back in 03.
more ambition than brains said
Nov 27, 2012
I have 2 pair. One set is still on the motor. 66/283 The other set is upstairs, kinda pitted can't read the casting numbers. The left one on the motor has a corner broken at the alternator mount, still seems to have threads though. $50.00 takes all. Karl
Lost in the 60s said
Nov 28, 2012
SShink wrote:
No worries Chris. They will go to the scrap yard the end of Dec. since I've been kicking them around for about 10 years now and nobody wants them...
Call Keystone Plating on the bumpers. If they are decent and just need rechromed, they may pay a little for them.
Chris R said
Nov 28, 2012
You could always give them to Jamie to store in the event someone in the club ever needs one in the future.
67ss said
Nov 28, 2012
more ambition than brains wrote:
I have 2 pair. One set is still on the motor. 66/283 The other set is upstairs, kinda pitted can't read the casting numbers. The left one on the motor has a corner broken at the alternator mount, still seems to have threads though. $50.00 takes all. Karl
I'll let you know Karl, If I have not gotten I set by the Bowtie Brunch I get them from you.
Thanks
more ambition than brains said
Nov 29, 2012
I you need them, they are here at the shop. I don't think they are going anywhere. We will have to pull the ones off the motor. I think they even still have heat shields and locks. You can do a demo on manifold removal at the Bow Tie Brunch if you end up taking them. Karl
If anybody has a set let me know how much you want for them.
Thanks
Chris, I have a pair off a '68 327 that was in an Impala. Would those work?
I can provide pics tonight if it might be what you need.
I think the Impala's all had ram horn style manifolds. But let me know maybe somebody swapped something else to the engine.
They are the straight version, not the ram's horn. I'll take some pics and will post them tonight.
Cool, if you are able to read the casting numbers could you post those also.
Thanks
Chris, I attached pics for you to see. I can only read one of the casting numbers; 336710 When I google it, it shows as a '74-78 Chevelle, Camaro, and Nova casting.
All I can tell you is that they fit the '72 Chevelle they were on with the car when I bought it.
If they work for you, great. If not, they are going to the scrap yard over the Christmas break along with 4 front '71/72 bumpers, old suspension springs, a '68 327 4 barrel intake manifold, and other steel/iron I've been storing for far too long.
Thanks Stan those are close but I would like to find a closer year set to match my car. But again thanks for the pictures.
No worries Chris. They will go to the scrap yard the end of Dec. since I've been kicking them around for about 10 years now and nobody wants them...
Donate them to the club for a raffle perhaps? I might be able to put them to use. My 76 GMC half has some issues with the flange to the exhaust pipe on the passenger side. I never mess with it since they are a dime a dozen but I did have to do some welding on it when I got it back in 03.
The other set is upstairs, kinda pitted can't read the casting numbers.
The left one on the motor has a corner broken at the alternator mount, still seems to have threads though.
$50.00 takes all.
Karl
Call Keystone Plating on the bumpers. If they are decent and just need rechromed, they may pay a little for them.
You could always give them to Jamie to store in the event someone in the club ever needs one in the future.
I'll let you know Karl, If I have not gotten I set by the Bowtie Brunch I get them from you.
Thanks
You can do a demo on manifold removal at the Bow Tie Brunch if you end up taking them.
Karl