I will get the part numbers off the box if anyone is interested. I have 14 springs and 15 lifters for a small block. Obviously there is a story there but am looking to trade/barter or you can just have them for the effort of picking them up!
Chris R said
Jul 4, 2010
Are they roller lifters or hydraulic? Used or new?
Remember that used hydraulic lifters cannot be swapped to another cam outside of the cam they were used on. And even then, the lifters have to be used on the exact lobes they were in on the existing cam. Mix them up or use them on another cam and you will get a flat lobe.
Roller lifters can be re-used on any cam. Although I have been hearing some say thats a no-no too. But I havent heard any issues with it.
4-door Chevelle said
Jul 4, 2010
These are hydraulic lifters that are new which is why I made the offer. I bought a full set back when I only needed one and thought some spares would be a good idea. Now some $89 later maybe not such a good idea?!?
Remember that used hydraulic lifters cannot be swapped to another cam outside of the cam they were used on. And even then, the lifters have to be used on the exact lobes they were in on the existing cam. Mix them up or use them on another cam and you will get a flat lobe.
Roller lifters can be re-used on any cam. Although I have been hearing some say thats a no-no too. But I havent heard any issues with it.